Tuesday, June 2, 2009

  • Processor : AMD Phenom™ II X4
  • Model : 910
  • OPN Tray : HDX910WFK4DGI
  • OPN PIB : N/A
  • Operating Mode 32 Bit : Yes
  • Operating Mode 64 Bit : Yes
  • Revision : C2
  • Core Speed (MHz) : 2600
  • Voltages : 0.875-1.425V
  • Max Temps (C) : 71'C
  • Wattage : 95 W
  • L1 Cache Size (KB) : 128
  • L1 Cache Count : 4
  • L2 Cache Size (KB) : 512
  • L2 Cache Count : 4
  • L3 Cache Size (KB) : 6144
  • CMOS : 45nm SOI
  • Socket : AM3
  • AMD Business Class : No
  • Black Edition : No
Read More......

  • Processor : AMD Phenom™ II X3
  • Model : 710
  • OPN Tray : HDX710WFK3DGI
  • OPN PIB : HDX710WFGIBOX
  • Operating Mode 32 Bit : Yes
  • Operating Mode 64 Bit : Yes
  • Revision : C2
  • Core Speed (MHz) : 2600
  • Voltages : 0.875-1.425V
  • Max Temps (C) : 73'C
  • Wattage : 95 W
  • L1 Cache Size (KB) : 128
  • L1 Cache Count : 3
  • L2 Cache Size (KB) : 512
  • L2 Cache Count : 3
  • L3 Cache Size (KB) : 6144
  • CMOS : 45nm SOI
  • Socket : AM3
  • AMD Business Class : No
  • Black Edition : No
Read More......

  • Processor : AMD Phenom™ II X3
  • Model : 720
  • OPN Tray : HDZ720WFK3DGI
  • OPN PIB : HDZ720WFGIBOX
  • Operating Mode 32 Bit : Yes
  • Operating Mode 64 Bit : Yes
  • Revision : C2
  • Core Speed (MHz) : 2800
  • Voltages : 0.850-1.425V
  • Max Temps (C) : 73'C
  • Wattage : 95 W
  • L1 Cache Size (KB) : 128
  • L1 Cache Count : 3
  • L2 Cache Size (KB) : 512
  • L2 Cache Count : 3
  • L3 Cache Size (KB) : 6144
  • CMOS : 45nm SOI
  • Socket : AM3
  • AMD Business Class : No
  • Black Edition : Yes
Read More......

  • Processor : AMD Phenom™ II X3
  • Model : 700e
  • OPN Tray : HD700EOCK3DGI
  • OPN PIB : -
  • Operating Mode 32 Bit : Yes
  • Operating Mode 64 Bit : Yes
  • Revision : C2
  • Core Speed (MHz) : 2400
  • Voltages : 0.825-1.25V
  • Max Temps (C) : 72
  • Wattage : 65 W
  • L1 Cache Size (KB) : 128
  • L1 Cache Count : -
  • L2 Cache Size (KB) : 512
  • L2 Cache Count : -
  • L3 Cache Size (KB) : 6144
  • CMOS : 45nm SOI
  • Socket : AM3
  • AMD Business Class : No
  • Black Edition : No
Read More......

  • Processor : AMD Phenom™ II X3
  • Model : 705e
  • OPN Tray : HD705EOCK3DGI
  • OPN PIB : HD705EOGIBOX
  • Operating Mode 32 Bit : Yes
  • Operating Mode 64 Bit : Yes
  • Revision : C2
  • Core Speed (MHz) : 2500
  • Voltages : 0.80-1.25V
  • Max Temps (C) : 72
  • Wattage : 65 W
  • L1 Cache Size (KB) : 128
  • L1 Cache Count : -
  • L2 Cache Size (KB) : 512
  • L2 Cache Count : -
  • L3 Cache Size (KB) : 6144
  • CMOS : 45nm SOI
  • Socket : AM3
  • AMD Business Class : No
  • Black Edition : No
Read More......

  • Processor : AMD Phenom™ II X2
  • Model : 545
  • OPN Tray : HDX545WFK2DGI
  • OPN PIB : -
  • Operating Mode 32 Bit : Yes
  • Operating Mode 64 Bit : Yes
  • Revision : C2
  • Core Speed (MHz) : 3000
  • Voltages : 0.875-1.425V
  • Max Temps (C) : 70
  • Wattage : 80 W
  • L1 Cache Size (KB) : 128
  • L1 Cache Count :
  • L2 Cache Size (KB) : 512
  • L2 Cache Count :
  • L3 Cache Size (KB) : 6144
  • CMOS : 45nm SOI
  • Socket : AM3
  • AMD Business Class : No
  • Black Edition : No
Read More......

  • Processor : AMD Phenom™ II X2
  • Model : 550
  • OPN Tray : HDZ550WFK2DGI
  • OPN PIB : HDZ550WGIBOX
  • Operating Mode 32 Bit : Yes
  • Operating Mode 64 Bit : Yes
  • Revision : C2
  • Core Speed (MHz) : 3100
  • Voltages : 0.850-1.425V
  • Max Temps (C) : 70
  • Wattage : 80 W
  • L1 Cache Size (KB) : 128
  • L1 Cache Count :
  • L2 Cache Size (KB) : 512
  • L2 Cache Count :
  • L3 Cache Size (KB) : 6144
  • CMOS : 45nm SOI
  • Socket : AM3
  • AMD Business Class : No
  • Black Edition : Yes
Read More......

  • Processor : AMD Athlon II™ X2
  • Model : 250
  • OPN Tray : ADX250OCK23GQ
  • OPN PIB : ADX250OGQBOX
  • Operating Mode 32 Bit : Yes
  • Operating Mode 64 Bit : Yes
  • Revision : C2
  • Core Speed (MHz) : 3000
  • Voltages : 0.85-1.425V
  • Max Temps (C) : 74
  • Wattage : 65 W
  • L1 Cache Size (KB) : 128
  • L1 Cache Count : -
  • L2 Cache Size (KB) : 512
  • L2 Cache Count : -
  • L3 Cache Size (KB) : -
  • CMOS : 45nm SOI
  • Socket : AM3
  • AMD Business Class : No
  • Black Edition : No
Read More......

Monday, May 11, 2009

Deleted cache of browser ??
if you open website in warnet, peaceful to be more, You require to vanish the cache browser.

For the Netscape of Navigator 4.06

  • Selecting menu Edit the - Preferences
  • At shares Category select;choose the Advanced - Cache
  • Click at Clear Memory Cache & Clear of Disk Cache.
Other Version please look for at menu which is there are Preferences.

For the Internet of Explorer 4

  • Selecting menu View - Internet Options
  • At tab General & shares of Temporary Internet Files click the Deletes Files.
  • For the other version please look at menu which is there are Internet Options.
Good luuckkk.... Read More......

You do not wish there is others knowing website of any kind of opened ?
Delete the list website which lay in your location bar browser.
When you are used Netscape, from menu Edit to select the Preference. Move to Category Navigator. To deleted the list website, click the button of article of Clear Location Bar
For the Internet Explorer 4.x, click of menu View, choose the Internet Options, at tab General, click at button Clear History.
Hopefully nobody being the wiser, website you which have open, more than anything else for a few in secret matter. Read More......

How to detect error with beep ?????
AST BIOS
  • One short --> CPU register test failure
  • Two short --> Keyboard controller buffer failure
  • Three short --> Keyboard controller reset failure
  • Four short --> Keyboard communication failure
  • Five short --> Keyboard input failure
  • Six short --> System board chipset failure
  • Nine short --> BIOS ROM checksum error
  • Ten short --> System timer test failure
  • Eleven short --> ASIC failure
  • Twelve short --> CMOS RAM shutdown register failure
  • One long --> DMA controller 0 failure
  • One long, one short --> DMA controller 1 failure
  • One long, two short --> Video vertical retrace failure
  • One long, three short --> Video memory test failure
  • One long, four short --> Video adapter failure
  • One long, five short --> 64KB memory failure
  • One long, six short --> Unable to load interrupt vectors
  • One long, seven short --> Unable to initialize video
  • One long, eight short --> Video memory failure
IBM BIOS
  • Two short --> Initialization error
  • One long, one short --> System board error
  • One long, two short --> Video adapter error
  • One long, three short --> EGA/VGA adapter error
  • Three long --> keyboard adapter error
  • Continuous --> Power supply error
  • No beep --> Power supply
Award Bios
  • One long, two short --> Video adapter error
  • Repeating (endless loop) --> Memory error
  • One long, three short --> No video card or bad video RAM
  • High frequency beeeps while running --> Overheated CPU
  • Repeating High/Low --> Either the CPU is not seated properly or the CPU is damaged
Read More......

You cannot using computer with properly ??
Becouse your hardisk is damage, bad sector.. and etc ?

We will sulking when cannot using computer with properly.
More than our data is loss.
Arrgghh .. of course .. very.. very angry.
Angry to whom .. ??
Sure.. we must to repair our harddisk.

How to repair our harddisk ??
One of tip or trics, we can use/exploiting disk repair aplication.
This aplication is simple, we earn easily use it.
For get this aplication, you can visit here .. --> http://www.divshare.com/download/5958277-7c0
Good luck.. Read More......

How to upgrade from Microsoft Windows 98, Microsoft Windows Millennium Edition (Me), and Microsoft Windows 2000 Professional to Windows XP.
To upgrade to Windows XP:
  • Start your computer, and then insert the Windows XP CD-ROM into the CD-ROM drive.If Windows automatically detects the CD-ROM, click Install Windows to start the Windows XP Setup Wizard.
  • If Windows does not automatically detect the CD-ROM, click Start, click Run, type the following command, and then click OK: CD-ROM drive letter:\setup.exe
  • When you are prompted to select an installation type, select Upgrade (the default setting), and then click Next.
  • Follow the instructions on the screen to complete the upgrade.
Read More......

How to install windows without CD-Rom .... ?????
  • Please install two hard disk (hard disk for installing and hard disk source program);
  • Turn on computer;
  • Wait … up to prompt A>, write E: or f: and press enter button;
  • Change directory into source program, example: cd\master\win98 or cd\driver\win98;
  • Write Setup or Install and press enter button;
  • The same process, for next question .. please select Next up to finish, exception if you want different selection, please you modify.
Until install windows…, system may be not yet automatic detection any hardware.
So… we must install this hardware with compatible driver.
This processing is :
  • Turn on computer, wait… up to windows menu and open windows explore;
  • Insert CD Driver Motherboard;
  • Click/select my computer;
  • Double Click CD Rom (otherwise…, double click Setup or Install);
  • Wait… until install menu, select menu for install hardware;
  • Note : if you has been double click, will continue menu choice and click Next.
Please to try and good luck. Read More......

How can I install windows with CD-Rom ???
  • Insert Diskette DOS or if you will be booting with CD;
  • Please setting bios so first booting from CD-Rom;
  • Turn on computer;
  • Next question…, will be using CD Room ?, Select/press 1 and press enter button;
  • Wait …… up to prompt A>, write : E: and press Enter button (if hard disk is two partition, C and D)
  • Write Setup or Install and press Enter button;
  • For next question… select Next up to finish (please modify if you want different selection.
Please to try and good luck. Read More......

How to Formated Hard Disk ??
  • Insert Diskette DOS into Drive A;
  • Turn on computer;
  • Wait … up to prompt A>, please write : format c:/s (if you will be formatting disk C, and write : format d:, if you will be formatting disk d, etc..) and press Enter button;
  • Select/press “Y” if exit question;
  • Please wait………, up to ending process;
  • If ending process, write label as your want, maximal 8 character;
  • Next question, What do you want formatting anything ?, press “N” if you don’t want formatting anything and press “Y” if you want formatting anything hard disk;
  • If you select “N”, so exit prompt A>;
We have to format a hard disk, please installation your system with Windows or etc….
please to try and good luck. Read More......

How can We are setting local printer ??
  • Connect computer with printer;
  • Click Start, Setting, Printer;
  • Select Add Printer, and click Next;
  • If type printer have been available in windows, select compatible Printer;
  • But … type printer have not been available in windows, insert Driver Printer into Disk Drive or CD Room, than select Have Disk and system reading from Drive A or CD Room.
  • Continue process… in principle than select/click Next;
  • For windows ‘95/98 will be use Windows Driver, and system reading from directory windows driver, Example : d:\win98 or d:\driver\win98 or d:\master\win98.
Please to try and good luck. Read More......

How to install network card... ???
  • Install a network card (if non on board);
  • Turn on computer, wait… until active windows and open windows explore;
  • Insert diskette drive or cd driver into drive or cd room;
  • Click my computer;
  • Double click disk drive or CD Room (otherwise…, double click Setup or Install);
  • Wait…, double click network menu to install;
Note: if have been double click, the principle process is click Next.

Please to try and good luck.
Read More......

How create partition ???
  • Insert Diskette DOS into Drive A;
  • Turn on computer;
  • Wait… up to prompt A> please write : fdisk and press Enter button;
  • Select and press key 1 (Create partition) then press Enter button;
  • Select and press key 1 (Primary) then press Enter button;
  • System will be detect hard disk’s capacity;
  • Will be question, what hard disk will be capacuty used as all primary ? if you select “Y”, so all hard disk will be used as primary, but if you select “N” : (1) Will be exit capacity hard disk for primary, please edit with your requirement and press Enter button; (2) Select and press key 1 (Create partition) and press Enter button; (3) Select and press key 2 and press Enter button; (4) System will be detected capacity of hard disk unused and will be unused capacity hard disk, so press Enter button (if you want two partition);
  • Wait … up to ending process;
  • Press Esc/Escape button for exit to prompt A>;
  • Turn off computer;
  • Turn on computer;
We have to create partition’s……, please formatting your hard disk, please to try and good luck. Read More......